Vogons packard bell master cd1/9/2024 Trying to get a pair of KVM'd machines to launch Prince of Persia in perfect sync was a fun minigame. At normal levels with a beige box or two whirring away on the desk, you have to go looking for it. But I'm cranking my sound system up to 100% to make the comparison. In this setup I'm hearing probably twice the idle noise out of the PAS16 that I am out of the Yamaha. But running through the mixer, I was able to bring the master back up to around 75% to match the level coming out of the 386/Yamaha setup. Addeddate 01:41:35 Identifier PackardBellMasterCD Identifier-ark ark:/13960/t2w42b69q Scanner Internet Archive HTML5 Uploader 1.6. So if you're using cans, drop the master right down. Packard Bell Master CD - A backup CD containing all of the files originally pre-installed on a Packard Bell PC. First, there was a PEBKAC factor in my distortion report I was using headphones at the time and the issue seems isolated to those. Could really have done this before posting. Either option depends on my Roland MPU-401 kit coming together, as neither sound card is up to the task of driving my external MIDI modules. I've seen suggestions on Vogons that this may only work on older boards.Īll going well, this could be a contender to go into the 386 (competing with my SB2.0, and definitely the better spec for the job). I noticed it's not picking up the PC speaker off the ISA bus. I bet a good programmer could take a look at the master cd and actually create the. Sadly I need some help finding the start-up floppy disk which you boot from to install windows 95 from the Master CD. That aside, the card sounds great in action. One of my first PCs was a Packard Bell 9029 from xmas 1997 and I still have it. My 386 with Yamaha card is hooked up to the same mixer, so I'll fire that up for a comparison later. There is still some faint white noise on the output, which may or may not be normal. With all that done I was quite happy with the result. You get a GUI mixer by typing PAS * and there are some nice detailed instructions for that here. I needed to drop the master volume down to 50% and of course mute any superflous features & inputs. Let it run with the default IRQ and DMA assignments so if things don't work right away, you at least know your good intentions weren't to blame.įirst run was a mess of noise and distortion which seems to be commonly reported. Important not to get too tricksy yourself during install too. (I accidentally let it install the CD driver, so I had to go in and restore my original one). Most sound card installers just add lines at the start, but this one is tricksier so you may want to edit to your liking. It will update both autoexec and config.sys, which is worth a quick check. You can leave that out if you're only concerned with DOS. dll split across the last two disks that is joined by the installer. You can dump the contents of all four disks into one folder, the only catch being that there's a. Installation is painless with this driver pack. Third card from the bottom, with the two big new caps visible to the left. Here it is going into a busy Socket 7 system (this is my 200mhz DOS Voodoo box). Would love more info on all the display mods you do, parts used etc.īack on my recapping jobs this weekend, the other one was my PAS16 which was a much easier one, and seems to have gone well.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |